REEL Endüstriyel Kimyasallar Makine İnşaat Sanayi ve Ticaret A.Ş olarak uzun soluklu görüşmelere istinaden ÇİN in konusunda en büyük firması olan JUNHE KAPLAMA TEKNOLOJİLERİ firmasıyla yaptığımız anlaşma üzerine

  1. Kaplama tesislerinin kurulumu
  2. Kaplama kimyasallarının satışı
  3. Yedek parça ve teknik servis hizmetlerinin verilmesi konusunda   bir iş birliği protokolü imzalanmıştır.

Changzhou Junhe Teknoloji Stok Co, Ltd
1998 yılında Changzhou, Jiangsu kuruldu endüstriyel ince kimyasallar, özel ekipman ve hizmetler çözüm sağlayıcısı geliştirmeye adamış bir yüksek teknoloji kuruluştur.
Çinko pul mikro tabaka korozyon koruma kaplaması temel ürünlerimizden biridir, firmamız 20 yıl uygulama ve difüzyondan sonra Ar-Ge’ye milyon yatırım yaparak Japonya ve ABD’den dacromet kaplama teknolojisinin deneyimine ve dersine dayanmaktadır, Junhe çinko pul mikro tabaka korozyon koruma kaplaması zaten Çin’in önde gelen markalarından biri haline geldi.

Changzhou Junhe Technology Stock Co.,Ltd

is a high-tech enterprise devoted to developing industrial fine chemicals,special equipment and services solution provider which was founded in Changzhou,Jiangsu in 1998.
Zinc flake microlayer corrosion protetion coating is one of our core products,our company draw on the experience and lesson of dacromet coating technology from Japan and USA,investing million on R&D,after 20 years application and diffusion,Junhe zinc flake microlayer corrosion protection coating already become one of the leading brand in China.

Zinc flake coating

Zinc flake coatings are non-electrolytically applied coatings, which provide good protection against corrosion. These coatings consist of a mixture of zinc and aluminium flakes, which are bonded together by an inorganic matrix.
The specifications for zinc flake coatings are defined in international standard ISO 10683 and also in European standard EN 13858. ISO 10683 sets out the requirements for zinc flake coatings for threaded fasteners and EN 13858 describes the requirements for zinc flake coatings for fasteners with no thread and for other parts as well.

Today, these are the preferred coatings for fasteners and other parts in the automotive industry, as they offer various advantages:

  • Good appearance (colouring)
  • Very good protection against corrosion (240 – 1,500 hours, depending on specification and coating thickness) Resistant to extreme temperatures
  • Good chemical resistance
Cooperative partner

Junhe Brake Disc Coating Line

Posted on 2019-10-16
With Independent R&D, intelligent design, energy-saving, environmental friendly, 100% control by completed operation of product manufacturing, 100% none blind area by quality guarantee.
Workpiece in process, roller loading, seamless connection , automatic chain transmission, synchronizing data transmission , 100% fully control.
One cycle time is 30 seconds for pre-heating process, the brake disc preheating temperature is 50 to 60 degrees centigrade.
Shifting sliding platform completes supporting clamping and workpiece transfer, equipped with the workpiece leveling mechanism to level the workpiece
Divider spraying platform is set inside the dry spray room, equipped with spraying stations and upper-lower materials stations, each station is equipped with rotation axis support points for 3 discs, to swing work alternately
Multi-position robot synchronous spraying system with faster speed and higher precision, using FESTO valve island closed-loop control spraying system,  Spray film thickness is more uniform , to reduce paint waste and more environmental friendly.
Paint supply system is set inside paint supply room, equipped with mixing and filtration system.
The transfer device is applied for upper-lower materials station of divider spraying platform transferring to the natural gas tunnel furnace, and upper materials station  shifting sliding platform transferring to the upper-lower materials station of  Divider spraying platform . Driven by servo motor, close-cycle control.
Natural gas tunnel furnace is equipped with chain transmission, the joist is provided with high and low dislocation support bar to improve the utilization rate of the furnace.
Electrical control uses communication method, which is more efficient, more convenient, support remote fault diagnosis, monitoring and update.